Improvements in farmland surface roughness measurement by employing a new laser scanner
| 第一作者： |
郑兴明 |
| 英文第一作者： |
Zheng, X. M. |
| 联系作者： |
郑兴明 |
| 英文联系作者： |
Zheng, X. M. |
| 发表年度： |
2014 |
| 卷： |
143 |
| 摘要： |
Farmland surface roughness is related to the surface root mean square height (rmsh) and surface correlation length (cl), and it is not only an important factor influencing wind and water erosion but also an input parameter for modeling radar backscattering coefficients and the passive microwave brightness temperature. Although these surface roughness parameters are important for soil erosion estimation and land surface parameter retrieval from microwave remote sensing data, their measurement accuracy is limited by the measurement method, instruments used and data preprocessing. To obtain high-precision surface roughness measurements, a laser scanner with spatial measuring range of 400 mm x 600 mm is used to measure the surface height of four test sites with different surface roughness. Based on the surface height data measured using the laser scanner, the effect of segment number on the surface roughness accuracy is analyzed using the random sampling method. The results show that the measurement uncertainties rmsh(m) and cl(m) decrease with increasing segment number. Among all four test sites, 80% and 90% accuracies can be achieved for rmsh(m) and cl(m), respectively. In addition, the required segment number for the same clm accuracy is found to be related to the degree of surface roughness, but this conclusion does not hold for rmsh(m). In summary, the accuracy of the surface roughness measured by the laser scanner is greater than 80%, and this scanner is very suitable for field measurements due to its ease of operability and mobility. |
| 刊物名称： |
Soil & Tillage Research |
| 参与作者： |
赵凯，李晓洁，李洋洋，任建华 |
吉公网安备22017302000214号
